Stihl 046 years made

Stihl 046 years made DEFAULT

Stihl MS 460 Chainsaw Specifications

Stihl MS 460 Specifications for Stihl MS460 chainsaws (including Magnum), Find detailed specs information for the Stihl chainsaw including engine, fuel, Carburetor, ignition system and cutting attachments.

Also covers chainsaw models MS460W, MS460WVH, MS460C, MS460 Magnum and MS460R Magnum.

Stihl MS 460 Specs

MS 660 Chainsaw Engine: STIHL single-cylinder two-stroke engine with special impregnated cylinder bore.

Replace carburetor with the following Walbro carbs:

Walbro Carburetor Models: HD-14A , HD-16 , HD-24A.

MS460 Engine

STIHL single cylinder two-stroke engine
Displacement: 4.67 cu. in. (76.5 cm3)
Bore: 2.05 in. (52 mm)
Stroke: 1.42 in. (36 mm)
Engine power to ISO 7293: 6.0 hp (4.5 kW) at 9,500 rpm
Idle speed: 2,500 rpm
Maximum permissible speed with bar and chain: 13,500 rpm
Clutch: Three-shoe centrifugal clutch without linings
Clutch engages at: 3,500 rpm
Crankcase leakage test at gauge pressure: 0.5 bar
under vacuum: 0.5 bar

MS460 Fuel System

All position diaphragm carburetor with integral fuel pump
Carburetor leakage test at gauge pressure: 0.8 bar
Operation of tank vent at gauge pressure: 0.3 bar
Fuel tank capacity: 27.1 fl.oz (0.8 l)

MS460 Ignition System

Electronic magneto ignition
Spark plug (suppressed): Bosch WSR 6F, NGK BPMR 7 A and Champion RCJ6Y
Air gap between ignition module and fan wheel: 0.15 – 0.3 mm
0.02 in. (0.5 mm)

MS460 Chain lubrication

Fully automatic, speed-controlled oil pump with reciprocating piston additional manual oil flow control
Oil tank capacity: 11.0 fl.oz (0.325 l)
Oil delivery rate: 8 – 18 cm3 at 10,000 rpm

MS460 Weight

dry, without bar and chain:
MS 460: 14.6 lbs. (6.6 kg)
MS 460 with handle and carburetor heating: 15.0 lbs. (6.8 kg)
MS 460 with loop handle: 15.2 lbs. (6.9 kg)

MS460 Cutting attachment

Rollomatic E guide bars
STIHL reduced kickback guide bars (with green label)
Bar lengths: 18, 20, 25, 28 in. (45, 50, 63, 71 cm)
Pitch: 3/8″ (9.32 mm)
Groove width: 0.050 in. (1.3 mm) or 0.063 in. (1.6 mm)
Sprocket nose: 10-tooth

Saw chains 3/8″

STIHL reduced kickback saw chain (with green label)
Rapid Super 3 (33 RS3) Type 3624
Pitch: 3/8″ (9.32 mm)
Drive link gauge: 0.050 in. (1.3 mm)

STIHL reduced kickback saw chain (with green label)
Rapid Super 3 (36 RS3) Type 3626
Pitch: 3/8″ (9.32 mm)
Drive link gauge: 0.063 in. (1.6 mm)

Chain sprockets

7-tooth for 3/8″ (rim sprocket)
7-tooth for 3/8″ (spur chain sprocket)

Stihl MS 460 Specifications Tightening Torques

DG screws are used in the polymer and light-alloy components. These screws form a permanent thread when they are installed for the first time. They can be removed and installed as often as necessary without detrimentally affecting the strength of the screwed assembly, providing the specified tightening torque is observed. For this reason it is essential to use a torque wrench when making adjustments from the Stihl MS 460 Specifications.

More Stihl MS 460 Specifications information can be found in Carburetor Manuals HERE and a Stihl MS460 chainsaw workshop manual HERE. Stihl Parts list HERE a chainsaw search (magnifier icon) at top and bottom of this page, as well as a chainsaw repair help question and answer page HERE.

Sours: https://chainsaw-workshop-manual.com/stihl-ms-460-specifications/
 
Screw for Stihl
Screw for Stihl0.96 EuroScrew for Stihl. Original number: 9075-478-4195  
Engine pan for Stihl 023 025 MS230 MS250
Engine pan for Stihl 023 025 MS230 MS2508.90 EuroEngine pan for: Stihl 023 Stihl 025 Stihl MS 230 Stihl MS 250 Original number: 1123-021-2500  
Engine pan for Stihl 017 018 MS170 MS180
Engine pan for Stihl 017 018 MS170 MS1808.90 EuroEngine pan for: Stihl 018 Stihl 017 Stihl MS 170 Stihl MS 180 Original number: 1130-021-2505  
Cylinder kit for Stihl MS192T NIKASIL 37mm
Cylinder kit for Stihl MS192T NIKASIL 37mm79.10 EuroFor chainsaw Stihl: Stihl MS 192T Piston diameter: 37 mm Piston pin diameter: 10 mm Content: - cylinder - piston - piston pin - piston rings - piston clips Original number: 1137-020-1201  
Cylinder kit for Stihl MS362 NIKASIL 47mm
Cylinder kit for Stihl MS362 NIKASIL 47mm91.12 Euro  For chainsaw Stihl: ms362 Piston diameter: 47mm Content: - cylinder - piston - piston pin - piston rings - piston clips Original number: 1140-020-1205    
Cylinder kit for Stihl MS361 47mm NIKASIL
Cylinder kit for Stihl MS361 47mm NIKASIL79.10 EuroThe subject of sale is:  Cylinder complete new high quality replacement: Stihl ms261 Diameter: 44.7 mm  The set you get: - Cylinder - piston - rings - pin - Safety pins Original number: 1135-020-1202  
Cylinder kit for Stihl MS 261 44,7 mm NIKASIL
Cylinder kit for Stihl MS 261 44,7 mm NIKASIL82.70 EuroThe subject of sale is:   Cylinder complete new high quality replacement: Stihl ms261 Diameter: 44.7 mm  The set you get: - Cylinder - piston - rings - pin - Safety pins Original number: 1141-020-1202  
Cylinder kit for Stihl 018 MS180 38mm
Cylinder kit for Stihl 018 MS180 38mm28.61 EuroFor chainsaw Stihl: Stihl 018 Stihl MS 180 Piston diameter: 38 mm Piston pin diameter: 10 mm Content: - cylinder - piston - piston pin - piston rings - piston clips Original number: 1130-020-1209  
Cylinder kit for Stihl MS171 MS181 MS211 38mm
Cylinder kit for Stihl MS171 MS181 MS211 38mm48.08 EuroFor chainsaw Stihl: Stihl MS 171 Stihl MS 181 Stihl MS 211 Piston diameter: 38 mm Piston pin diameter: 10 mm Content: - cylinder - piston - piston pin - piston rings - piston clips  
Cylinder kit for Stihl 017 MS170 37mm
Cylinder kit for Stihl 017 MS170 37mm28.61 EuroFor chainsaw Stihl: Stihl 017 Stihl MS 170 Piston diameter: 37 mm Piston pin diameter: 8 mm Content: - cylinder - piston - piston pin - piston rings - piston clips Original number: 1130-020-1204   
Cylinder kit for Stihl 044 MS440 NIKASIL 50mm
Cylinder kit for Stihl 044 MS440 NIKASIL 50mm60.10 EuroFor chainsaw: Stihl 044 Stihl MS 440 Piston diameter: 50 mm Content: - cylinder - piston - piston pin - piston rings - piston clips Original number: 1128-020-1227    
Cylinder kit for Stihl 036 MS360 NIKASIL 48mm
Cylinder kit for Stihl 036 MS360 NIKASIL 48mm67.80 EuroFor chainsaw Stihl: Stihl 036 Stihl MS 360 Piston diameter: 48 mm Content: - cylinder - piston - piston pin - piston rings - piston clips Original number: 1125-020-1215  
Cylinder kit for Stihl 029 039 MS290 MS390 NIKASIL 49mm
Cylinder kit for Stihl 029 039 MS290 MS390 NIKASIL 49mm75.73 EuroFor chainsaw Stihl: 029 039 Stihl MS 290 Stihl MS 390 Piston diameter: 49 mm Content: - cylinder - piston - piston pin - piston rings - piston clips Original number: 1127-020-1216  
Cylinder kit for Stihl 029
Cylinder kit for Stihl 02947.84 EuroFor chainsaw Stihl: 029 Content: - cylinder - piston - piston pin - piston rings - piston clips Original number: 1127-020-1210    
Cylinder kit for Stihl 026 NIKASIL
Cylinder kit for Stihl 026 NIKASIL68.04 Euro  For chainsaw Stihl: 026 Piston diameter: 44,7 mm Content: - cylinder - piston - piston pin - piston rings - piston clips Original number: 1121-020-1217    
Cylinder kit for Stihl 026 MS260 44mm
Cylinder kit for Stihl 026 MS260 44mm45.44 EuroFor chainsaw Stihl: Stihl 026 Stihl MS 260 Piston diameter: 44 mm Content: - cylinder - piston - piston pin - piston rings - piston clips Original number: 1121-020-1203 | 1121-020-1208 | 1121-020-1209  
Cylinder kit for Stihl 025 MS250 NIKASIL 42,5mm
Cylinder kit for Stihl 025 MS250 NIKASIL 42,5mm65.88 EuroFor chainsaw Stihl: Stihl 025 Stihl MS 250 Piston diameter: 42,5 mm Content: - cylinder - piston - piston pin - piston rings - piston clips Original number: 1123-020-1207  
Cylinder kit for Stihl 025 MS250 42mm
Cylinder kit for Stihl 025 MS250 42mm28.85 EuroFor chainsaw Stihl: Stihl 025 Stihl MS 250 Piston diameter: 42 mm Piston pin diameter: 10 mm Content: - cylinder - piston - piston pin - piston rings - piston clips Original number: 1123-020-1207  
Cylinder kit for Stihl 023 MS230 NIKASIL 40mm
Cylinder kit for Stihl 023 MS230 NIKASIL 40mm59.62 EuroFor chainsaw Stihl: Stihl 023 Stihl MS 230 Piston diameter: 40 mm Content: - cylinder - piston - piston pin - piston rings - piston clips Original number: 1123-020-1223  
Cylinder kit for Stihl 023 MS230 40mm
Cylinder kit for Stihl 023 MS230 40mm26.93 EuroFor chainsaw Stihl: Stihl 023 Stihl MS 230 Piston diameter: 40 mm Piston pin diameter: 10 mm Content: - cylinder - piston - piston pin - piston rings - piston clips Original number: 1123-020-1214  
Cylinder kit for Stihl 017 018 MS170 MS180 NIKASIL 38mm
Cylinder kit for Stihl 017 018 MS170 MS180 NIKASIL 38mm58.66 EuroFor chainsaw Stihl: Stihl 017 Stihl 018 Stihl MS 170 Stihl MS 180 Piston diameter: 38 mm Piston pin diameter: 10 mm Content: - cylinder - piston - piston pin - piston rings - piston clips Original number: 1130-020-1208  
Cylinder kit for Stihl 017 018 MS170 MS180 NIKASIL 38mm
Cylinder kit for Stihl 017 018 MS170 MS180 NIKASIL 38mm58.66 EuroFor chainsaw Stihl: Stihl 017 Stihl 018 Stihl MS 170 Stihl MS 180 Piston diameter: 38 mm Piston pin diameter: 8 mm Content: - cylinder - piston - piston pin - piston rings - piston clips Original number: ...  
Cylinder with piston Stihl MS171 MS181 MS211 40mm
Cylinder with piston Stihl MS171 MS181 MS211 40mm59.86 EuroCylinder kit for Stihl MS171 MS181 MS211 Piston diameter: 40 mm Ring diameter: 40 x 1,2 mm Content: - cylinder - piston - piston pin - piston ring - piston clips Part No. 1139 020 1201  
Cylinder with piston Stihl MS171 MS181 MS211 38mm
Cylinder with piston Stihl MS171 MS181 MS211 38mm59.86 EuroCylinder kit for Stihl MS171 MS181 MS211   Piston diameter: 38 mm Ring diameter: 38 x 1,2 mm Content: - cylinder - piston - piston pin - piston ring - piston clips Part No. 1139 020 1201  
Cylinder kit for Stihl MS260 - Meteor - Made in Italy
Cylinder kit for Stihl MS260 - Meteor - Made in Italy105.54 EuroNew ORIGINAL cylinder kit Meteor Piston . For chainsaw: Stihl MS260 Piston diameter: 44,7 mm Pin diameter: 10 mm Ring diameter: 44,7 x 1,2 mm Content: - cylinder - piston - piston pin - piston rings - piston clips OEM ... 
Sours: https://megaserwis.com/cylinder-kit-for-stihl-046-ms460-meteor-made-in-italy-p-3095.html?language=en
  1. Network icons vector
  2. Adventure time skull
  3. Evil hello kitty wallpaper

Quote:


I believe all those were made in Germany, no evidence of anything else!

A 6 bhp Magnum will also be a very late 046 afaik, right before the MS460 took over - earlier 046s were rated at 5.6 bhp, and were a bit lighter.

By this statement, are you suggesting that all Stihl chainsaws are made in Germany or just the 046 model? I'm curious by that statement.
Doesn't the first digit of the serial number designate country of origin? The number 1 being Germany and 2 being the United States. The serial number to the 046 in the first post to this thread and in the models library is 139057990 [Germany] and I have an older 026 that starts with the number 2 [United States of America]. All of my new/newer Stihl products start with the number 2 in their serial numbers.
I posted the pictures of the 046 in the library because there were no others listed and I thought it might be helpful to those reserching various models that may be new to collecting such as myself. Chainsaws have always played small roll in my life for upkeep on the place, firewwood, etc. The idea of collecting and tinkering on them is new to me in the last year. And quite interesting.
Rodney.

(Fixed quote.Magnus)


Sours: http://www.chainsawcollectors.se/phpbb3/viewtopic.php?t=12539
Stihl 046 All Original MM Only

Stihl MS460 Magnum Chainsaw Runs Great OEM Engine READ ALL! 046 044 440 066 660

SoldSee similar items$424.50Buy It Now, $35.00 Shipping, eBay Money Back Guarantee

Seller:silver70chally✉️(3,627)100%, Location:Latrobe, Pennsylvania, Ships to: US, Item:173815085184Stihl MS460 Magnum Chainsaw Runs Great OEM Engine READ ALL! 046 044 440 066 660 . Stihl MS460 Magnum Chainsaw. This has an all oem engine, plus the better earlier D chamber 046 cylinder, more compression and better port design than the later 460 style. Also has the larger muffler opening of the 046 with the open internals(no baffling). This saw does have some aftermarket parts, the tank is a ms440 aftermarket tank, difference is, little narrower, otherwise fits like a 460 tank. Has aftermarket cover, brake handle, handle bar, air filter/base and new twist lock style caps(easier to use). New crankshaft bearings and seals also, oem walbro carb was rebuilt. Has a decompression valve, but doesn't always pop up on its on, but seals good when up. Saw starts, idles, revs, cuts, oils etc like it should. The tag was off a 660, so curves up, 5 dollar part from the dealer for a ms460 tag. Add a bar/chain and fuel mix/bar oil and it will be ready to use. SOLD AS IS, NO WARRANTIES AND NO RETURNS!Condition:Used, All returns accepted:ReturnsNotAccepted, Brand:stihl, MPN:Does Not Apply, Type:chainsaw, Model:ms460 magnum, Features:Anti-Kickback, Country/Region of Manufacture:Germany

PicClick Insights - Stihl MS460 Magnum Chainsaw Runs Great OEM Engine READ ALL! 046 044 440 066 660 PicClick Exclusive

  •  Popularity - 0 views, 0 views per day, 2 days on eBay. 1 sold, 0 available.
  • 0 views, 0 views per day, 2 days on eBay. 1 sold, 0 available.

  •  Price -
  •  Seller - 3,627+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.
  • 3,627+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

    Recent Feedback

People Also Loved PicClick Exclusive

Sours: https://picclick.com/Stihl-MS460-Magnum-Chainsaw-Runs-Great-OEM-Engine-173815085184.html

046 made stihl years

.

REPOST - Stihl 046 Ported - In Wood -Not Good

.

Now discussing:

.



244 245 246 247 248